Choosing a robotic pool cleaner becomes much easier when you stop comparing feature lists and start with five practical questions: What type of pool do you have? Which surfaces need cleaning? What debris is most common? How large is the pool? How much control do you want?
This guide explains those decisions and shows where different AIRROBO robotic pool cleaners fit.
1. Start With the Area You Need to Clean
“Pool cleaner” can describe several different machines. A pool-floor vacuum collects settled dirt. A wall-climbing cleaner adds wall and waterline scrubbing. A robotic skimmer collects floating leaves and pollen before they sink. Decide which cleaning zones matter before comparing price or runtime.
- Floor only: A practical choice for routine sand, dirt, and settled debris.
- Floor, walls, and waterline: Better when algae film and debris collect beyond the pool floor.
- Water surface: Useful around trees or in windy areas where leaves, pollen, and insects frequently land in the pool.
- Whole-pool cleaning: Combines underwater cleaning and surface collection in one system.
2. Match the Cleaner to Pool Type and Size
Above-ground and inground pools can differ in wall construction, slopes, depths, drains, steps, and surface materials. Check the product’s rated pool area and depth, but also consider geometry. A simple rectangular pool is easier to cover than a pool with shelves, sharp corners, or multiple levels.
Never choose solely by maximum square footage. A cleaner also needs suitable traction and enough runtime for your layout. Confirm surface compatibility for vinyl, PVC, tile, mosaic, fiberglass, or glass before purchase.
3. Compare AIRROBO Pool Cleaner Types
| Model | Primary cleaning area | Rated runtime | Best fit |
|---|---|---|---|
| CP02 | Pool floor | Up to 120 minutes | Simple cordless floor cleaning |
| PC10 | Floor, walls, waterline | Up to 120 minutes | Three selectable cleaning modes |
| CP20 | Floor, walls, waterline | Up to 120 minutes | Wall climbing and a 4L filter |
| CP40 | Floor, walls, waterline | See product specifications | App-controlled inground-pool cleaning |
| CP400Lite | Floor, walls, waterline | Up to 150 minutes | Larger inground pools |
| CP400 | Floor, walls, waterline, surface | Up to 150 minutes | Whole-pool cleaning with app control |
| SP200 | Water surface | Solar + DC charging | Floating leaves, pollen, and insects |
4. Think About the Debris in Your Pool
Fine sand and silt require suitable filtration. Large leaves need basket capacity and an opening that is easy to clear. Floating debris calls for a surface skimmer; once it sinks, an underwater vacuum must collect it. If your pool receives both floating leaves and settled dirt, a skimmer-and-vacuum combination may reduce manual work.
5. Decide How Much Control You Need
Basic cordless cleaners use onboard controls: select a mode, place the cleaner in the water, and let it complete a cycle. App-enabled cleaners can provide additional mode selection or operating information. App control can be useful, but cleaning coverage, filtration, runtime, and easy maintenance usually matter more than the number of smart features.
6. Check Maintenance Before You Buy
A robot still needs routine care. Look for a filter basket that is easy to reach, remove, rinse, and reinstall. Confirm that replacement filters, brushes, and power adapters are available. After each cycle, remove debris, rinse the filter, inspect the brushes and tracks, and let the unit dry away from direct heat.
A Simple Decision Shortcut
- Choose a floor cleaner if settled debris is your main concern.
- Choose a wall-climbing model if you want floor, wall, and waterline coverage.
- Choose a surface skimmer if floating leaves are the recurring problem.
- Choose longer runtime and higher rated coverage for a larger or more complex pool.
- Choose app control when remote mode selection matters to you.
Browse and compare the full AIRROBO robotic pool cleaner collection, then verify the selected model’s specifications against your pool before purchasing.
